Sony SNT-V304 User Manual page 30

Operation
8 [RELAY] Button
Clicking this activates or deactivates the relay output,
according to the system administrator settings.
9 [HOME] Button
Returns the video camera to the home position.
q; [PRESET] Drop-Down List
Select a preset camera position by name from this list
to set the camera to that fixed position (previously set
by the system administrator).
qa [HSR] Button
Clicking this button changes to the HSR View, in
which images of video cameras connected to an HSR-
1/1P/2/2P can be monitored, and the HSR-1/1P/2/2P
can be controlled. Refer to the "HSR View Mode" on
page 36 for details.
qs [Admin] Button
Clicking this button displays the "Administration
overview" page, where video network station settings
and management can be performed. Access to this
page is normally restricted to the system administrator.
30
qd Site Name
This is the name assigned to the overall video network
station system.
qf Camera Title
This is the title of the video camera.
qg Date and Time
This is current date and time.
qh Video Camera Images
When a video camera has the Pan/Tilt function
enabled, clicking at a point in an image causes the
camera to pan and tilt so that the clicked point
becomes the center of the image.
qj Snapshot Icon
Clicking this icon saves the image currently displayed
in [Fullsize] JPEG format in the video network
station's memory. To display images saved in this
fashion, refer to "Viewing Alarm Event Images" on
page 32.