Sony SNT-V304 User Manual page 24

Settings
To avoid this, perform the following procedure:
1
In the [DAY] column of the previous setting's
second line, select [-] and click the [SET] button.
2
Display the "RECORDING FUNCTION" page
once again, and input the following data:
DAY TIME REC
MON 01:00 AM 1
--- --:-- AM -
3
Enter the new setting as shown below, and click
the [SET] button.
DAY TIME REC
MON 03:00 AM 1
MON 05:00 AM 2
• Recording Mode Setting Procedure
To set the recording mode, open the "RECORDING
MODE 1" - "RECORDING MODE 5" pages from
the "RECORDING FUNCTION" page, and set the
following items:
– [CAMERAS]
– [TAPE LENGTH]
– [IMAGE QUALITY]
– Either [TIME MODE] or [RECORDING
CYCLE]
The HSR-1/1P/2/2P automatically calculates the
value of either [TIME MODE] or [RECORDING
CYCLE] that was not entered when you click the
[SET] button. If the entered value is outside of the
valid setting range, an error message appears, so you
can enter a valid value. To verify the settings, display
the "RECORDING MODE 1" through
"RECORDING MODE 5" pages again.
• Relationship between HSR-1/1P/2/2P Passwords
and Video Network Station Password
The password entered for [PASSWORD SETTING]
on the "FUNCTION CONTROL" page restricts
operation of the HSR-1/1P/2/2P (which is different
from the "Security" password set for the video
network station – see page 18). However, the system
manager (root user) of the video network station can
change the passwords for any connected HSR-1/1P/2/
2P. The system manager's password should therefore
be handled carefully.
24
TIME REC
02:00 AM 0
--:-- AM -
TIME REC
04:00 AM 0
--:-- AM -
• Setting and Canceling HSR-1/1P/2/2P Passwords
The password entered for [PASSWORD SETTING]
on the "FUNCTION CONTROL" page may consist
of up to four characters. Asterisks (*) are displayed
when the HSR-1/1P/2/2P password has been set. To
cancel a password, delete the displayed asterisks (*)
and click the [SET] button with both [USER
PASSWORD] and [CONFIRM PASSWORD] boxes
empty.
• Time Display Format
The following four display formats are available on
the HSR-1/1P/2/2P "INDICATION CONTROL"
page, which are independent of the video network
server's "Date & Time" (see page 17).
– "SETUP MENU" - "TIME ADJUSTMENT"
– "SETUP MENU" - "RECORDING FUNCTION"
- [TIMER RECORDING]
– HSR View - "HSR CONTROL" - [TIME
SEARCH]
– HSR View - "HSR CONTROL" - [ALARM
SEARCH] - [ALARM LIST]
To change these display formats, change the [DATE
FORMAT] and [TIME FORMAT] on the
"INDICATION CONTROL" page.
• Setting the HSR-1/1P/2/2P Communications Speed
to Match the Video Network Station
When changing the [RS-232C] communications
speed on the "REMOTE CONTROL" page, be sure
to also set the video network station communications
speed on the "Serial Port 1 Settings" page (see page
20) to the same value. If these settings are not the
same, the video network station will be unable to
control the HSR-1/1P/2/2P.
• The "SERVICE USE" Page is for Maintenance
Service
The "SERVICE USE" page in the
"MAINTENANCE MENU" is for maintenance
service. It is password protected to limit display to
authorized users only.