Sony SNT-V304 User Manual page 16

Settings
Settings can be made with the following procedures.
• (Network Wizard) icon: click to display Wizard
instructions for making the settings.
• (Detailed View) icon: click to display a dialog
box with [TCP/IP], [DNS] and [SMTP [EMail] ] tabs
that you can select to make corresponding settings.
Settable contents are shown in the following table.
Setting Description
TCP/ BOOTP (Protocol for loading an IP address
IP automatically) Check this box to
enable.
Auto-
mati- DHCP (Protocol for acquiring an IP address
cally
automatically) Check this box to
enable.
Click the [Config] button to select a
method to be used to notify changes to
IP address information. Refer to
"Setting the IP Address Notification
Method" below for details.
TCP/ Internet Enter the video network station IP
IP Address address.
manu-
Default Enter the network default router
ally Router address.
Subnet Enter the network subnet mask. This
Mask parameter is used to determine
whether communication is passed
through the router.
Host Name Enter the video network station's host
name.
Bandwidth Network bandwidth to be assigned to
Control the video network station is selected
from the drop-down list.
DNS
Domain Enter the network domain name.
Name
Primary Enter the IP address of the primary
DNS Server DNS server. The DNS server is used
to recognize computers by domain
names instead of IP addresses.
Secondary Enter the IP address of the secondary
DNS Server
DNS server. The secondary DNS
server is used when the primary DNS
server is unusable or unavailable.
SMTP Primary Enter the IP address or name of the
Mail Server primary mail server.
[EMail]
Secondary Enter the IP address or name of the
Mail Server secondary mail server. The secondary
mail server is used when the primary
mail server is unusable or unavailable.
Return Enter the return address of email sent
Email from the video network station, which
Address is the mail address you wish to appear
in the "FROM" field of email sent from
the video network station.
16
z Hint
• BOOTP and DHCP cannot be changed with the
"Network Wizard".
• BOOTP and DHCP cannot both be enabled at the
same time.
• Do not make DNS settings if a PPP connection is
used for e-mail.
Setting the IP Address Notification Method
When the IP address of the video network station has
been changed by DHCP, information regarding the
new IP address can be sent as a notification by the
selected IP address notification method.
The notification method is set in the "Dynamic IP
Address Notification" dialog box. This can be
displayed by clicking the
and then clicking the [Config] button on the [TCP/IP]
tab of the "Network Settings" dialog box.
The following settings are available.
HTTP
An HTTP GET request is sent to the specified URL,
where the information is processed by a CGI script on
the server that receives the request.
Note
No application related to this function is provided.
Setting Description
Enabled Enables notification by HTTP.
Disabled Disables notification by HTTP.
URL Specifies the URL of the script to
process HTTP GET requests.
Custom Optional parameters. Enter the
Parameters character string of the encoded URL,
prefixed by an ampersand ("&")
character.
User Name If the CGI script is password-protected,
enter the user name.
Password If the CGI script is password-protected,
enter the password.
Proxy When connecting to a host specified
by the URL through a proxy server,
enter the IP address of the proxy
server.
Port Enter the port number used by the
proxy server.
Proxy User If a user name is required to connect
to the proxy server, enter the user
name.
Pass If a password is required to connect to
the proxy server, enter the password.
(Detailed View) icon