Further Instructions; Printer Options; Shortcut Codes - ATB HiSpeed 8200 Installation Manual

Further Instructions

Printer Options

The printer is set up for the second receipt to come out in 10 seconds of the first. To change this setting:
Press admin button twice, enter admin code 14 & push OK.
At "preprint" scroll down using F1 to print delay, press OK. Put in the number of seconds you
want the second receipt to come out.
Press OK.
If you want to press OK to get the second receipt to come out:
Enter 99 as the number of seconds then push OK.
This will take you back to preprint.
Press red cancel button twice.
The terminal should now say "PURCHASE ENTER AMOUNT".

Shortcut Codes

Printing a help list:
Press blue admin button twice enter admin code 40 press OK
Note: You will need to press admin twice before using any of these codes.
IMPORTANT – For a detailed description on processing of transactions, end of day
procedures and all other functionality of your POS device please refer to the Quick
Reference guide supplied to you in the package with the device
Prior to the shipment of your device we communicated to you which of the following
settlement options is currently applied to your merchant account.
If you are set to System Close we automatically settle your transactions for you at the end of each day and
the following end of day reporting applies to you:
Print Stored Transaction Listing (Admin 60 report)
Print Merchant Subtotals Report (Admin 95 report)
Note: The merchant subtotals report must be completed prior to 11pm local time.
Compare the totals on each report to ensure they match. Please contact us within 30 days for any
discrepancies.
If you are set to Merchant Close you are responsible for settlement (close batch) at the end of each day and
the following end of day reporting applies to you:
Print Stored Transaction Listing (Admin 60 report)
Close Batch (Admin 99 report)
Compare the totals on each report to ensure they match. Please contact us within 30 days for any
discrepancies.
For detailed instructions please refer to your Quick Reference Guide
8