Overview The NPort 6600 series of serial device servers includes 8-port, 16-port, and 32-port models for connecting larger numbers of serial devices to Ethernet. Some applications now also require better security when transmitting data through a network. The NPort 6600 series of device servers use DES, 3DES, and AES data encryption to provide secure network communication.
Hardware Introduction Demonstrated 8 port model to be an example. Reset Button Press the Reset button continuously for 5 second to load factory defaults: Use a pointed object to press the reset button. Release the button after the Ready LED stops blinking. RS-485 adjustable pull high/low resistor (150/1 KΩ) The NPort 6650 has 3 DIP Switches associated with each serial port for configuring the pull high/low resistors for RS-485 applications.
Function Power is being supplied to the power input. Ready Steady Power is on and the NPort 6600 series is booting up. Blinking: IP conflict, DHCP or BOOTP server not responding, or relay output. Check relay output first. If still blinking, then...
Installation CD window opens, click on the Installation button, and then follow the instructions on the screen. To view detailed information about the NPort Search Utility, refer to the pdf version of the “NPort 6600 Series User’s Manual,” which is located in the document directory of the CD.