Schedules Menu (4/13) - Pentair Pool and Spa Control System SunTouch Installation And User Manual

Schedules Menu (4/13)

Scheduled start and stop programs can be assigned to pool, spa and auxiliary circuits (AUX 1, AUX 2, AUX 3)
functions. The start and stop times can be programed to run automatically within a 12 hour period. The default
run time for a scheduled circuit is 8:00 AM to 5:00 PM which can be adjusted in 15 minutes increments. A
maximum of four scheduled programs can be setup for any one circuit, with a total of six programs for all
circuits combined.
To program a circuit:
Main Menu 4/13
Schedules
Schedule [Pool
Prg: 0/0 - Add
Schedule [Pool
Prg: 0/0 - Add
Schedule [Pool
Prg: 1/1 - Edit
Schedule [Pool
Start: 8:00 AM
Schedule [Pool
Stop: 4:30 AM
Main Menu 4/13
Schedules
Schedule [Pool
Prg: 0/0 - Add
POOL 71°F / 91°F
11: 51AM HEATER
Add a new program to a circuit
Press the Menu button to select the Schedules menu (4 of 13).
Press the Right button to schedule an available circuit.
Press the Up/Down button to select the circuit to program. The circuits are: Pool,
]
Spa, AUX 1, AUX 2, AUX 3. If there existing programs assigned to circuits, use
these buttons to scroll through the each programmed circuit.
]
Press the Right button twice to move to the mode settings (Add, Edit Delete). To
add a program, Use the Up/Down button to select Add. Press the Right button.
]
"Edit" is displayed (blinks on and off) and the circuit number will increment from zero
to one (1/1). At this point there are still three available circuit that can be assigned to
the circuit.
Mode settings
•
Add: Add up to four programs to the selected circuit.
•
Delete: Delete the current program
•
Edit: Move to the Start/Stop time for the current circuit program.
Set the start and stop time
Press the Right button to move to Start time setting for the circuit.
]
Press the Up/Down button to set the time to automatically start the circuit. Adjust
the start time in 15 minutes increments for AM or PM.
Press the Right button to move to Stop time setting.
]
Press the Up/Down button to set the time to automatically stop the circuit. Adjust
the stop time in 15 minutes increments for AM or PM.
Press the Right button twice to set to edit another program.
]
or
Press the Left button to return to the main status screen.
SunTouch Pool and Spa Control System Installation and User's Guide
17