Philips BDL3221V/00 Service Manual page 82

82 BDL3221 LCD/TV
Go to cover page
3.2.4.3 OSD messages
Cannot Display This Video Mode,
Change computer input to 1366x768 @ 60Hz
OSD
attention
signal
No Video Input
Use 1366 x 768 for best Result.
·
Attention Signal off
Above attention signals can be switched off by pressing "UP" and "DOWN" key together for more than 10
seconds if there is no video signal in. The Attention signal "Attention signals on" or "Attention signal off"
appears for 3 seconds.
3.2.4.4 OSD Lock
OSD function can be locked by
·
Pressing "Menu" button for more than 10 seconds while there is video signal in.
The screen automatically shows OSD MAIN MENU LOCKED for 3 seconds.
When users press "Menu" button, OSD Lock MENU will appear, and the default cursor location will be on unlock.
·
Using RS232 command.
OSD can be unlocked by
·
Pressing front panel "Menu" button for more than 10 seconds while there is video signal in. As the menu button is
pressed, the screen will keep showing OSD MAIN MENU LOCKED until OSD function unlocked. Then, OSD MAIN
MENU UNLOCK will automatically show for 3 seconds.
·
Using RS232 command.
3.2.4.5 Hidden functions
The following hidden functions are available for development and service personnel only, not for end customers.
Function
OSD lock / unlock
Factory Mode
Switch on / off
attention signals
2005-06-17
Freud Yu
GENERAL PRODUCT SPECIFICATION(Continued)
Message
Press "Menu" button for more than 10 seconds while there is video signal in.
· To hold "Menu + DOWN" buttons, then Power on while there is
video signal in. Monitor will exit factory mode automatically once
power is off.
· Press remote control code "062596", then press menu key.
To press "UP" and "DOWN" key together for more than 10 seconds while is no
video signal in.
32 inch BDS WXGA TFT LCD Monitor/TV
TYPE : BDL3221V/00
BRAND : PHILIPS
2005-06-17
When
· Dot Rate higher than 103MHz
Horizontal frequency does not fall into
between 30 and 61kHz
· Vertical frequency does not fall
between 56Hz and 75Hz (Non-
Interlaced)
· Resolution higher than 1366x768
No video signal input as monitor power on.
When input signal's resolution is below 1366 x 768
Description
8639 000 16304
32 590 11