Philips BDL3221V/00 Service Manual page 33

8. Click Next , bring up Fig. 39.
- Click Finish to exit the Step window.
- Serial number can be filled up at this moment (for example,
123457).
NOTE: You must modify the Serial NO. In step 9, otherwise the
Serial NO. In OSD Couldn't be modified correctly.
Fig. 39
Step 5: Write DDC data
1. Configuration should be as Fig. 40. And press OK.
2. Access Factory Mode
1). Turn off monitor.
2). Press power " " button.Then quickly push "
hold this two buttons , then the screen comes out "Waiting For
Automatic Adjustment ",then the screen will be black for one
second untill comes out "Windows screen"] => then release this
two buttons.
3). Press "MENU" button, wait until the OSD menu with
Characters "BDS 32*420WN6 EU V0.50.3 05051LC32*A
6K3*A1" (below OSD menu) come on the Screen of the
monitor.
Factory Mode indicator
Fig. 41
4) Push Menu to exit OSD menu. " "
3. Click (Write EDID) icon from the tool bar to write DDC data. Then
wait for 20-30 seconds ,DDC data will be finished Writing.
Step 6: Save DDC data
Sometimes, you may need to save DDC data as a text file for using
in other IC chip. To save DDC data, follow the steps below:
1. Click (Save) icon (or click "file"-> "save as") from the tool bar and
give a file name as shown in Fig. 42.
The file type is EDID46 file (*.ddc) which can be open in WordPad. By
using WordPad, the texts of DDC data & table (128 bytes, hex
code) can be modified. If DDC TEXTS & HEX Table ar completely
correct, it can be saved as *.ddc flie to re-load it into DDC IC for DDC
Data application.
DDC Instructions
2. Click Save.
Step 7: Exit DDC program
Fig. 40
Pull down the File menu and select Exit as shown in Fig. 43.
" and " ",and
Step 8: Turn off the monitor, exit the factory mode.
BDL3221 LCD/TV
Go to cover page
Fig.42
Fig. 43
33