Functions Description; Aging Mode Description - Panasonic BRS1D Service Manual

5.2.

FUNCTIONS Description

Function Name
Tray - Open
Tray - Close
Trv - Forward
Trv - Reverse
LD-Motor -FW
LD-Motor -Rev
RESET
Retry Mode
5.3.

AGING MODE Description

Aging Mode
Loading Cycle
Traverse Cycle
Combine Cycle
** The above aging mode will stop when user press [RESET] or switch OFF power on this board.
Function Description
When press [LD_OPEN], LD Motor drive until detect LOAD-SW = LO
When press [LD_CLOSE], LD Motor drive until detect LOAD-SW = LC
When press [TRV FW], Trv Motor drive until detect INNER-SW = L
When press [TRV REV], Trv Motor drive until detect OUTER-SW = L
When press [LD-FWD] and hold, LD Motor turns CCW until button release.
When press [LD-REV] and hold, LD Motor turns CCW until button release.
When press [RESET], the mechanism will go through the INITIALIZATION process.
When press [Retry Mode]. The tray retry function will activated
Aging Mode Description
When press [Load Cycle], mechanism will be in continuos mode for
tray open & close operation.
When press [Trv Cycle], mechanism will be in continuos mode for
OPU forward & reverse operation.
When press [Combi Cycle], mechanism will carry out full operation from
OPU at outer position - Tray fully opened & vice versa in continuos mode.
31