Panasonic BRS1D Service Manual page 19

4.2.4. Replacement of Belt, Pulley Gear &
Driver Gear
• Refer to "Replacement of Tray"
• Refer to "Replacement of Traverse Unit"
• Refer to "Replacement of Traverse Slide Plate"
• Disassembly of Belt
Step 1 : Remove the Belt as shown.
• Disassembly of Pulley Gear
Step 2 : Use a screwdriver to release the catches and push
down the Pulley Gear in order of sequences (1) to (2).
Step 3 : Remove the Pulley Gear as shown.
• Disassembly of Driver Gear
Step 4 : Remove the Driver Gear as shown.
19