Panasonic BRS1D Service Manual page 17

4.2.2. Replacement of Traverse Unit
• Refer to "Replacement of Tray"
Note :
1. When the optical pickup unit is defective, the overall
traverse unit needs replacement.
2. Please note that appropriate actions need to be taken to
prevent static damage.
Step 1 : Release the guide as shown & slide the Traverse Slide
Plate to the end.
Step 2 : Release the 24P FFC from the slot.
Step 3 : Lift the Traverse Unit by approximately 45°.
Step 4 : Slide out the traverse unit as arrow shown.
17