i3 International SAN iS316 User Manual page 81

INFO Volt recovery
WARNING Therm warn OT
WARNING Therm warn UT
WARNING Therm fail OT
WARNING Therm fail UT
INFO Therm recovery
INFO JBOD HDD path NG
INFO PD RPS started L2F
INFO PD RPS started F2L
INFO PD RPS started F2F
INFO PD RPS finished L2F
INFO PD RPS finished F2L
INFO PD RPS finished F2F
ERROR PD RPS failed L2F
ERROR PD RPS failed F2L
ERROR PD RPS failed F2F
ERROR PD VD read write
fault
ERROR PD IO retry fault
ERROR PD substitute L2F
ERROR PD substitute F2L
ERROR PD substitute F2F
HAC Events
Level Type
INFO RG owner changed
INFO Force CTR write
through
INFO Restore CTR cache
mode
INFO Failover complete
INFO Failback complete
INFO CTR inserted
ERROR CTR removed
ERROR CTR timeout
ERROR CTR lockdown
ERROR CTR memory NG
ERROR CTR firmware NG
ERROR CTR lowspeed NG
UNDER
Voltage of <string> in JBOD <string> is NORMAL
Temperature of <string> read as <string> in JBOD <name> is
OT WARNING
Temperature of <string> read as <string> in JBOD <name> is
UT WARNING
Temperature of <string> read as <string> in JBOD <name> is
OT FAILURE
Temperature of <string> read as <string> in JBOD <name> is
UT FAILURE
Temperature of <string> in JBOD <name> is NORMAL
Path redundancy to JBOD <name> PD <number> is lost
Assign JBOD <name> PD <slot> to replace PD <slot>.
Assign PD <slot> to replace JBOD <name> PD <slot>.
Assign JBOD <name> PD <slot> to replace JBOD <name> PD
<slot>.
PD <slot> is replaced by JBOD <name> PD <slot>.
JBOD <name> PD <slot> is replaced by PD <slot>.
JBOD <name> PD <slot> is replaced by JBOD <name> PD
<slot>.
Failed to replace PD <slot> with JBOD %4d PD <slot>.
Failed to replace JBOD <name> PD <slot> with PD <slot>.
Failed to replace JBOD <name> PD <slot> with JBOD <name>
PD <slot>.
Read error at LBA <address>-<address> of JBOD <name> PD
<slot> and rewrite failed at LBA <address>-<address> of VD
<name>.
Over I/O retry limit in last 10 minutes on JBOD <name> PD
<slot>, replacing the disk is highly recommended.
Over I/O retry limit in last 10 minutes on PD <slot>, the disk is
disabled for automatic rebuilding with JBOD <name> PD <slot>.
Over I/O retry limit in last 10 minutes on JBOD <name> PD
<slot>, the disk is disabled for automatic rebuilding with PD
<slot>.
Over I/O retry limit in last 10 minutes on JBOD <name> PD
<slot>, the disk is disabled for automatic rebuilding with JBOD
<name> PD <slot>.
Description
The preferred owner of RG <name> has been changed to
controller <number>.
Controller <number> forced to adopt write-through mode on
failover.
Controller <number> restored to previous caching mode on
failback.
All volumes in controller <number> completed failover process.
All volumes in controller <number> completed failback process.
Controller <number> is inserted into system
Controller <number> is removed from system
Controller <number> gets no response
Controller <number> is locked down
Memory size mismatch
Firmware version mismatch
Low speed inter link is down
81