i3 International SAN iS316 User Manual page 77

INFO Fan install
ERROR Fan not present
ERROR Fan over speed
WARNING Thermal level 1
ERROR Thermal level 2
ERROR Thermal level 2
shutdown
ERROR Thermal level 2 CTR
shutdown
WARNING Thermal ignore value
WARNING Voltage level 1
ERROR Voltage level 2
ERROR Voltage level 2
shutdown
ERROR Voltage level 2 CTR
shutdown
INFO UPS OK
WARNING UPS fail
ERROR UPS AC loss
ERROR UPS power low
WARNING SMART T.E.C.
WARNING SMART fail
WARNING RedBoot failover
WARNING Watchdog shutdown
WARNING Watchdog reset
RMS Events
Level Type
INFO Console Login
INFO Console Logout
INFO Web Login
INFO Web Logout
INFO Log clear
WARNING Send mail fail
LVM Events
Level Type
INFO RG create OK
INFO RG create fail
INFO RG delete
INFO RG rename
INFO VD create OK
INFO VD create fail
INFO VD delete
INFO VD rename
INFO VD read only
INFO VD write back
INFO VD write through
INFO VD extend
INFO VD attach LUN OK
INFO VD attach LUN fail
INFO VD detach LUN OK
INFO VD detach LUN fail
Fan (<string>) is installed
Fan (<string>) is not present
Fan (<string>) is over speed
System temperature (<string>) is higher.
System Overheated (<string>)!!!
System Overheated (<string>)!!! The system will auto-shutdown
immediately.
The controller will auto shutdown immediately, reason
[Overheated (<string>)].
Unable to update thermal value on <string>
System voltage (<string>) is higher/lower.
System voltages (<string>) failed!!!
System voltages (<string>) failed!!! The system will auto-
shutdown immediately.
The controller will auto shutdown immediately, reason [Voltage
abnormal (<string>)].
Successfully detect UPS
Failed to detect UPS
AC loss for system is detected
UPS Power Low!!! The system will auto-shutdown immediately.
Disk <slot> S.M.A.R.T. Threshold Exceed Condition occurred for
attribute <string>
Disk <slot>: Failure to get S.M.A.R.T information
RedBoot failover event occurred
Watchdog timeout shutdown occurred
Watchdog timeout reset occurred
Description
<username> login from <IP or serial console> via Console UI
<username> logout from <IP or serial console> via Console UI
<username> login from <IP> via Web UI
<username> logout from <IP> via Web UI
All event logs are cleared
Failed to send event to <email>.
Description
RG <name> has been created.
Failed to create RG <name>.
RG <name> has been deleted.
RG <name> has been renamed as <name>.
VD <name> has been created.
Failed to create VD <name>.
VD <name> has been deleted.
Name of VD <name> has been renamed to <name>.
Cache policy of VD <name> has been set as read only.
Cache policy of VD <name> has been set as write-back.
Cache policy of VD <name> has been set as write-through.
Size of VD <name> extends.
VD <name> has been LUN-attached.
Failed to attach LUN to VD <name>.
VD <name> has been detached.
Failed to attach LUN from bus <number>, SCSI ID <number>,
77