i3 International SAN iS316 User Manual page 80

INFO BBM installed
INFO BBM status good
INFO BBM status charging
WARNING BBM status fail
INFO BBM enabled
INFO BBM inserted
INFO BBM removed
JBOD Events
Level Type
INFO PD upgrade started
INFO PD upgrade finished
WARNING PD upgrade failed
INFO PD freed
INFO PD inserted
Warning PD removed
ERROR HDD read error
ERROR HDD write error
ERROR HDD error
ERROR HDD IO timeout
INFO JBOD inserted
WARNING JBOD removed
WARNING JBOD SMART T.E.C
WARNING JBOD SMART fail
INFO JBOD CTR inserted
WARNING JBOD CTR removed
WARNING JBOD degraded
INFO PD dedicated spare
INFO PD global spare
ERROR Config read fail
ERROR Config write fail
DEBUG PD read error
WARNING PD write error
INFO PD scrub started
INFO PD scrub completed
WARNING PS fail
INFO PS normal
WARNING FAN fail
INFO FAN normal
WARNING Volt warn OV
WARNING Volt warn UV
WARNING Volt crit OV
WARNING Volt crit UV
finished
Battery backup module is detected
Battery backup module is good
Battery backup module is charging
Battery backup module is failed
Battery backup feature is <string>.
Battery backup module is inserted
Battery backup module is removed
Description
JBOD <name> PD [<string>] starts upgrading firmware process.
JBOD <name> PD [<string>] finished upgrading firmware
process.
JBOD <name> PD [<string>] upgrade firmware failed.
JBOD <name> PD <slot> has been freed from RG <name>.
JBOD <name> disk <slot> is inserted into system.
JBOD <name> disk <slot> is removed from system.
JBOD <name> disk <slot> read block error
JBOD <name> disk <slot> write block error
JBOD <name> disk <slot> is disabled.
JBOD <name> disk <slot> gets no response
JBOD <name> is inserted into system
JBOD <name> is removed from system
JBOD <name> disk <slot>: S.M.A.R.T. Threshold Exceed
Condition occurred for attribute <string>
JBOD <name> disk <slot>: Failure to get S.M.A.R.T information
Controller(<number>) of JBOD <name> is inserted into system
Controller(<number>) of JBOD <name> is removed from system
JBOD <name> is in degraded mode.
Assign JBOD <name> PD <slot> to be the dedicated spare disk
of RG <name>.
Assign JBOD <name> PD <slot> to Global Spare Disks.
Config read error occurred at LBA <address>-<address> of
JBOD <name> PD <slot>.
Config write error occurred at LBA <address>-<address> of
JBOD <name> PD <slot>.
Read error occurred at LBA <address>-<address> of JBOD
<name> PD <slot>.
Write error occurred at LBA <address>-<address> of JBOD
<name> PD <slot>.
JBOD <name> PD <slot> starts disk scrubbing process.
JBOD <name> PD <slot> completed disk scrubbing process.
Power Supply of <string> in JBOD <name> is FAIL
Power Supply of <string> in JBOD <name> is NORMAL
Cooling fan of <string> in JBOD <name> is FAIL
Cooling fan of <string> in JBOD <name> is NORMAL
Voltage of <string> read as <string> in JBOD <name> is WARN
OVER
Voltage of <string> read as <string> in JBOD <name> is WARN
UNDER
Voltage of <string> read as <string> in JBOD <name> is CRIT
OVER
Voltage of <item> read as <string> in JBOD <name> is CRIT
80