Specifications; Product Identification; Engine; Mower - Jacobsen PGM 22 InCommand Technical Manual

2

SPECIFICATIONS

2 SPECIFICATIONS
2.1

PRODUCT IDENTIFICATION_________________________________________________

63280.........22 in., (559 mm) 11 Blade Professional
Greens Mower with InCommand™ control
4.0 H.P. gasoline engine (Honda),
system,
Operator Presence Control, grass catcher,
brakes, and kickstand.
63286.........22 in., (559 mm) 15 Blade Professional
Greens Mower with InCommand™ control
system, 4.0 H.P. gasoline engine (Honda),
Operator Presence Control, grass catcher,
brakes, and kickstand.
Serial Number ................ An identification plate, like the one
2.2

ENGINE__________________________________________________________________

Engine ....................... Honda GX-120 K1Q JG2 4-Cycle,
4 HP (2.98 kW) at 4000 RPM
Speed ........................ High Idle - 3300 + 100 RPM
Low Idle - 1700 + 100 RPM
Fuel............................ Regular Grade (Unleaded)
Fuel Tank ................... 0.66 Gallon (2.5 liter)
2.3

MOWER _________________________________________________________________

Height of cut ................. 5/64 to 7/16 in., (2 to 11 mm)
Bedknives ..................... Hardened carbon steel
High profile ................... yields 5/32 in., (4 mm) cut.
Low profile .................... yields 7/64 in., (2.8 mm) cut.
Tournament................... yields 5/64 in., (2 mm) cut.
Super Tournament .......... Yields 1/16 in. (1.6 mm) cut
2.4

TRACTION AND DIFFERENTIAL _____________________________________________

Drive Clutch .........................Centifugal, Engages at 2000
Traction Reduction Ratio .....24:1
Traction and Reel Drive .......Chain drive
Transport Wheels ................(2) bidirectional, pneumatic
Tire Pressure .......................6 to 8 psi (0.41 to 0.55 BAR)
Differential ...........................Full automotive type,
en-6
shown, listing the serial number, is
RPM
11 x 4 Goodyear Softrac
housed in traction drum
Always provide the serial number of the unit when ordering
replacement parts or requesting service information.
PRODUCT OF U.S.A.
85
kg
62380001651
Use clean, fresh, regular unleaded gasoline, 85 octane
minimum. When using blended fuel, do not use a blend
with more than 10% ethanol.
Under no circumstances should you use a blend with
methanol.
Engine Oil . . . . . . . . . Capacity: 5/8 qt. (0.6 l)
Type: SAE 10W-30, API Classifi-
cation SF or SG
Cutting Frequency .........13/64 in., (5 mm)
Reel ...............................11 or 15 blades, 5 in., (127 mm)
Reel Clutch....................Separate Cog-type
Reel Reduction Ratio ....2.25:1
Width of cut ...................22 in., (559 mm)
Rear Drive Drum .................Machined aluminum alloy
Travel Speed .......................2.9 mph (4.7 km/h) @ 3000
attached to the right side frame.
11524 WILMAR BLVD,
®
CHARLOTTE, NC 28273
A Textron Company
1-800-848-1636 (US)
2.6 XXXX
kW
diameter hardened high
manganese, carbon steel
2 sections: 7-3/4 in., (O.D.) x
10.97 in., (197 x 278 mm)
rpm