Jacobsen PGM 22 InCommand Technical Manual page 15

E. Reel Clutch Lever – To disengage, turn handle (E)
to point downwards. Always disengage clutch when
mower is being transported.
!
WARNING
To prevent bodily injury or property damage, never
engage the reel clutch lever while the engine is
running or the O.P.C. bail is engaged.
!
DANGER
Keep hands and feet away from the cutting unit to
prevent serious cuts.
F. Choke Lever - The choke lever opens and closes
the choke valve in the carburetor. The CLOSED
position enriches the fuel mixture for starting a cold
engine. The OPEN position provides the correct fuel
mixture for operation after starting, and for restarting
a warm engine.
G. Fuel Valve Lever - The fuel valve opens and closes
the connection between the fuel tank and the
carburetor. The fuel valve lever must be in the ON
position for the engine to run. When the engine is
not in use, leave the fuel valve lever in the OFF
position to prevent carburetor flooding and to reduce
the possibility of fuel leakage.
NOTICE
Before tipping mower back for adjustments, the fuel
lever must be moved to the OFF position to prevent
fuel from leaking into the crankcase.
H. E-Stop - Used to stop the engine. Push switch
down to disable engine ignition, pull up for normal
operation.
CONTROLS
E
F
OFF
G
5
Figure 5C
Figure 5D
en-15