General Information; Disassembly - Pioneer GM-222 Service Manual

7. GENERAL INFORMATION

7.1 DISASSEMBLY

A
Panel
B
C
Amp Unit
A
Case
Fig. 6
Sub Heat Sink
B
C
Heat Sink
Fig. 7
- Removing the Case and Panel
1. Remove six screws A, and then remove case.
2. Remove panel.
- Removing the Amp Unit
Some silicone glue has been applied between the
Heat Sink and the Sub Heat Sink. therefore, to
remove the Amp Unit from the Heat Sink.
1. Remove four screws B and three screws C.
2. Use 2 pcs. of screw B and insert them into the two
holes marked with an arrow.
3. Alternately tighten them little by little until the Sub
Heat Sink separates from the Heat Sink.
Sub Heat Sink
GM-222
15