Internet Connection Feature - Yaesu FT-8800 Reference

INTERNET CONNECTION FEATURE

DTMF tone is sent at the
beginning of every
transmission
The FT-8800R can be used to access the repeater which is
configured to provide access to the Vertex Standard WIRES™
(Wide-Coverage Internet Repeater Enhancement System).
1. Tap the "left" VOL knob momentarily to activate the
WIRES™ access capability. The "INT ON" will appear for
2 seconds at the "Main" band frequency display. The "int"
icon will appear in the memory channel field on the "Sub"
band while WIRES™ access is enabled.
2. Rotate the "Main" band DIAL knob, while pressing and
holding in the "left" VOL knob, to select the access number
(ICODE "0" - "9,"A," "B ," "C," "D ," "E (*)," or "F (#)")
corresponding to the WIRES™ repeater to which you wish
to establish an Internet link (ask your repeater
owner/operator if you don't know the access numbers in the
network).
3. With the WIRES™ capability activated (as in step 1 above),
the FT-8800R will generate a brief (0.1 second) DTMF tone
according to your selection in step 2. This DTMF tone is
sent at the beginning of every transmission to establish or
maintain the link to the remote WIRES™ repeater.
4. To disable the WIRES'™ access capability; tap the "left"
VOL knob again.
[LOW] [V/M] [HM] [SCN]
6 FT-8800 Reference
[SET]