THOMSON R7.4 Configuration Manual page 33

Table of Contents

Advertisement

Untagged: this parameter indicates whether the bridge port is tagged or untagged member of the
unknown VLAN. If the parameter is not specified, the parameter is enabled.
=>:eth bridge unknownvlan iflist
Bridge
--------------------------------------
bridge
=>:eth bridge unknownvlan ifconfig intf=ethport1 untagged=disabled
=>:eth bridge unknownvlan iflist
Bridge
--------------------------------------
bridge
Applications
An important application of the unknown VID policy is the
scenario, all ingress frames with an unknown or unconfigured VID are sent to or from the WAN-side "trunk"
port in a transparent way.
E-DOC-CTC-20080229-0001 v1.0
Interface
Untagged
ethport1
yes
Interface
Untagged
ethport1
no
4|
Ethernet Bridge and VLANs
transparent VLAN trunking
scenario. In this
27

Advertisement

Table of Contents
loading

Table of Contents