Sony MXD-D5C Service Manual page 31

5-1. Operating the Continuous Playback Mode
1. Entering the continuous playback mode
(1) Set the disc in the unit. (Whichever recordable discs or discs for playback only are available)
[ AMS
(2) Turn the l L
[YES]
(3) Press the button to change the display to "CPLAY2MID".
(4) When access completes, the display changes to "C =
Note: The numbers " " displayed show you error rates and ADER.
2. Changing the parts to be played back
[YES]
(1) Press the button during continuous playback to change the display as below.
"CPLAY2MID" t "CPLAY2OUT" t "CPLAY2IN"
When pressed another time, the parts to be played back can be moved.
(2) When access completes, the display changes to "C =
Note: The numbers " " displayed show you error rates and ADER.
3. Ending the continuous playback mode
[MENU/NO]
(1) Press the button. The display will change to "CPLAY2MODE" (C36).
[ EJECT]
(2) Press the button and take out the disc.
A
Note: The playback start addresses for IN, MID, and OUT are as follows.
IN 40h cluster
MID 300h cluster
OUT 700h cluster
5-2. Operating the Continuous Recording Mode (Use only when performing self-recording/playback check)
1. Entering the continuous recording mode
(1) Set a recordable disc in the unit.
[ AMS
(2) Turn the
l L
[YES]
(3) Press the button to change the display to "CREC 2MID".
(4) When access completes, the display changes to "CREC (
Note: The numbers " " displayed shows you the recording position addresses.
2. Changing the parts to be recorded
[YES]
(1) When the button is pressed during continuous recording, the display changes as below.
"CREC 2MID" t "CREC 2OUT" t "CREC 2IN"
When pressed another time, the parts to be recorded can be changed. "
(2) When access completes, the display changes to "CREC (
Note: The numbers " " displayed shows you the recording position addresses.
3. Ending the continuous recording mode
[MENU/NO]
(1) Press the button. The display changes to "CREC 2MODE" (C37) and "
[ EJECT]
(2) Press the A button and take out the disc.
Note 1: The recording start addresses for IN, MID, and OUT are as follows.
IN 40h cluster
MID 300h cluster
OUT 700h cluster
[MENU/NO]
Note 2: The
Note 3: Do not perform continuous recording for long periods of time above 5 minutes.
Note 4: During continuous recording, be careful not to apply vibration.
6. FUNCTIONS OF OTHER BUTTONS
Function
Sets continuous playback when pressed in the STOP state. When pressed during continuous playback,
H (MD)
the tracking servo turns ON/OFF.
x (MD)
Stops continuous playback and continuous recording.
M (MD) The sled moves to the outer circumference only when this is pressed.
m (MD) The sled moves to the inner circumference only when this is pressed.
REC MODE Switches between the pit and groove modes when pressed.
Switches the spindle servo mode (CLVS y CLVA).
PLAY MODE (MD)
DISPLAY Switches the displayed contents each time the button is pressed
A EJECT Ejects the disc
I/1 Releases the test mode
]
(MD) knob and display "CPLAY2MODE" (C36).
]
(MD) knob and display "CREC 2MODE" (C37).
button can be used to stop recording anytime.
AD = ".
AD = ".
REC
" and " " lights up.
REC
" goes off.
REC
" and " " lights up.
REC
Contents
" goes off.
31