Sony MXD-D5C Service Manual page 24

FITTING BASE (GUIDE) ASS'Y, BRACKET (CHASSIS) AND MAGNET ASS'Y
2 four screws
3 fitting base
(guide) ass'y
1 two connectors
TRAY (SUB)
1 Rotating the pulley (LD), shift the slider (selection) in the direction of arrow A .
2 Rotating the pulley (mode) in the arrow direction, adjust the tray (sub) to be removed.
3 Rotating the pulley (LD), shift the slider (selection) in the direction of arrow B .
4 Rotating the pulley (mode) in the arrow direction, remove the tray (sub).
tray (sub)
24
6 bracket
(chassis)
(BVTP M2.6)
4 two screws
(BVTP M2.6)
(CN709, 715)
pulley (LD)
stocker section
8 four screws
(BVTP M2.6)
5 two screws
slider (selection)
A
B
7 connector
(CN710)
9 magnet ass'y
(BVTP M2.6)
pulley (mode)