Polar Electro V800 Owner's Manual page 27

1. Plug the USB cable into your computer and snap the connector onto your V800. Make sure FlowSync
software is running.
2. The FlowSync window opens on your computer, and the syncing starts.
3. Completed is displayed when you are done.
Every time you plug in your V800 to your computer, the Polar FlowSync software will transfer your data to
the Polar Flow web service and sync any settings you may have changed. If the syncing does not
automatically start, start FlowSync from the desktop icon (Windows) or from the applications folder (Mac OS
X). Every time a firmware update is available, FlowSync will notify you, and request you to install it.
If you change settings in the Flow web service while your V800 is plugged into your computer, press the
synchronize button on FlowSync to transfer to the settings to your V800.
For support and more information about using the Flow web service, go to
For support and more information about using FlowSync software, go to
www.polar.com/en/support/FlowSync
www.polar.com/en/support/flow
27