Table of Contents
Advertisement
4
Attention! This device is intended to operate from the power source 220V/50Hz.
The user should use electric power cord with a ground contact. Do not use power
cable or power cord without ground contact.
· Read this manual before operation
· The manual should be available to operator
• Do not use this device under the following conditions:
- The device is not resting on a level surface
-The device is in an excessively dusty or polluted room
-The device will be exposed to vibration while in use
-The device is exposed to direct sunlight or strong directional interior lighting
• Do not operate the device with wet hands
• During operation, do not touch the moving parts of the counter
• Do not expose to water (or other liquid). Avoid foreign objects, paper clips, and
staples
• Avoid dropping the device
• When finished be sure there are no banknotes in the hopper or transport system
• Clean the device regularly and service the device as needed at a licensed service
center to ensure the device will function within its specified parameters
• Do not disassemble, repair or attempt to update the counter on your own. This
can result in damage to the device or injury to the operator
• If the device was exposed to cold for an extensive period of time, it is necessary
to keep it at the room temperature for no less than 6 hours, when the device has
not been stored in a box. If the device has been stored in a box while expose to cold
temperature, allow the device to sit at room temperature for 12 hours prior to use.
Remember! The producer is in no way responsible for damage to the device
or injury to the operator in the event of incorrect operation /care of the device.
5
Safety precautions and maintenance rules
Control panel functions
5
Advertisement
Table of Contents
