Table of Contents
Advertisement
1 Currency type does not accord to the counted type.(Different. denomination)
2 Banknotes that do not accord the counting mode. (Different. Orientation)
3 Wrong banknote location in the insert pocket (New. Banknote face)
4 Banknote has rumples, alien tissue, dirt, defects, etc. To view the number of mis-
takes and quantity of banknotes in the reject pocket, press «REJECT» button -
Enables / disables reject pocket display:
On the screen: Counterfeit banknotes-suspicious banknotes that did not pass UV,
MG, IR detections.
Twin jacked banknotes: also can be suspicious banknotes, which did not pass the
check on optical density, or shape.
Twin jacked banknotes: also can be suspicious banknotes, which did not pass the
check on optical density, or shape.
Error code for every banknote is reflected in system message in the right lower cor-
ner of the screen.
In the case of banknote getting into the reject pocket, the results are not sent into
the counter memory, so it is better to replace the banknotes out of the reject pock-
et into the hopper again, while counting or recounting. If the banknotes got out of
the reject pocket into the hopper again, place them into the hopper in other orien-
tation (another side). If these measures do not help, the banknote can't be real, and
you have to use other methods of detection.
10.1 «BAMT». Pre-packing adjusted mode
1. Adjust the following counting mode: Denomination-MIX, orientation-OFF
Only in this mode you can use pre-packing on adjusted sum.
2.Press BATCH button.
18
Advertisement
Table of Contents
