Table of Contents
Advertisement
13
Daily servicing
Banknote counter is a very complicated device, which uses many detection and
scan line for counterfeit detection of banknotes and banknote counting. CIS scan-
ner and electronic detectors are very sensitive on dirt and dust, if they are not
cleaned necessary they can give false information, which will lead to errors and bad
work of device. Clean the scan line glass of CIS and RGB CIS every day after work.
During cleaning, the counter power source must be unplugged. Do not use volatile
detergents. On the picture below you can see inner surfaces which need to be
cleaned frequently.
Follow these steps for cleaning:
1 Open back lid.(cover)
2 Clean the inner surface of the lid from dust and dirt, then polish it by a soft dry
cloth.
3 Attention! Carefully, without pressing, wipe the glass of the upper and lower scan
line by a brush, or soft cloth. If the glass has lot of dirt, use a cloth with the solution
of spirit first, then clean it by a dry brush or cloth. Do not press on the glass when
cleaning, and do not scratch or rub the glass of scan line.
4 Close back lid. (click)
5 Clean all rollers of the hopper by a spirit solution every week.
22
Advertisement
Table of Contents
