Table of Contents
Advertisement
9.1 Recounting operation
WARNING! To avoid mistakes when counting, please mix the banknotes and resort
the following:
- banknotes, repaired by stickers, or washed banknotes.;
-Dirty; rumpled; torn; banknotes with bending, alien writings, the one with clips.
ATTENTION! Adjust regulated banknote rails, accordingly to their size.
Banknotes must be put in a batch to the hopper. It is vital to place the ban-
knotes in the pocket in a proper way, because the banknote recognition is
mainly depends on it.
If the banknotes are not similar to each other, euro for instance, we recommend you
to sort them from bigger size to a smaller one.
- Put the banknotes into the insert pocket
- In one second the counter will start to move automatically and will count the ban-
knotes.
- The amount of the counted banknotes can be seen on the display.
- Repeat the operation several times if necessary.
9.2. BATCH mode
Set the required banknote amount that you need to count on the display. Set the
number of required quantity. Using «BATCH» button enter the menu of Batch
mode.
Set the required number of banknote quantity using buttons (0-9) on the left of the
control panel. Press ОК button to save. For exit and cancel press "CLEAR" button.
AMT BATCH FUNC must be in OFF position.
16
Advertisement
Table of Contents
