Summary of Contents for PRO Nekson 2F
- Page 1 User Manual Sorting banknote counter PRO NEKSON PRO Nekson 2V / Sorter PRO Nekson 2F / Fitness Sorter - only for EURO Версия 2 / 08.2011...
-
Page 2: Table Of Contents
Contents 1 Main function .......................3 2 Appearance ......................4 3 Specifications ......................4 4 Safety precautions and maintenance rules ............5 5 Control panel functions ..................5 6 Counter work preparation..................12 7 Currency adjustments ..................14 8 Counting and sorting mode adjustments ............14 9 Banknote counting in a regular «CNT» mode..........16 10 «D.D. -
Page 3: Main Function
Sorting banknote counters of PRO NEKSON series are able to scan the banknote’s face on both sides, in Infra-Red RGB and white light. Counterfeit detection is pro-... -
Page 4: Appearance
Appearance 1.Control panel 2.Hopper 3.Stacker 4.Auxiliary hooper plates 5.Paper thickness adjustment screw 6.Reject pocket 7.Power switch 8.Power cord 9.Rear cover opening handle. 10.Rear cover 11.Micro-SD port 12.RS-232 port for PC or printer connection 13.External display port 14.Folding banknote rails Specifications Counting speed, Banknotes/min . -
Page 5: Safety Precautions And Maintenance Rules
Safety precautions and maintenance rules Attention! This device is intended to operate from the power source 220V/50Hz. The user should use electric power cord with a ground contact. Do not use power cable or power cord without ground contact. · Read this manual before operation ·... - Page 6 1. Operator display. 2. «OK» / «START/STOP» buttons. Start counting, continue. Data saving 3. «CURRENCY» button. Currency selection To change the currency press «CURRENCY» button several times if necessary. Press «OK» button to save. Press «CLEAR» button to clear. 4. «MODE» button. Selects counting modes: FIT, D.D, CNT FIT Mode of fitness sorting D.D Counting mode-counts with summation of banknotes’...
- Page 7 5. «DENOM» button chooses banknote denominations: - «MIX» mixed denominations banknote counting - «AUTO» First denomination banknote sorting - «MANU» Banknote sorting on first adjusted denomination with the help of «►», «◄» buttons.. AUTO MANU 6. «FACE / ORT» button is used for banknote orientation mode - «OFF»...
- Page 8 «OFF» «AUTO» «FACE» «ORT» If the counter used in banks regular mode is «AUTO», in which you can control denomination and orientation of the banknote - on the first banknote: 7 «BATCH» button is used to enter prepacking mode. CNT-BATCH Prepacking mode, adjusted on banknotes quantity. Adjust the necessary prepacking quantity, using (0-9) buttons on the left part of the control panel.
- Page 9 8. «FUNC» button is used to enter the additional functions menu: Press «▲», «▼» buttons for selection, ОК button to enter. 1) Issue date sorting mode: ALL, OLD, NEW. Press «►», «◄» buttons for selection. Press ОК to adjust. Press «CLEAR» button to cancel. If you adjust ALL mode (cannot be seen on the counting display) All issue dates banknotes are counted.
- Page 10 9. «▲», «▼» и «►», «◄» buttons are used to change display modes /banknote summation mode/ regular mode. Use «►» or «◄» buttons to change display modes several times if necessary. In other modes these buttons are used to change prepacking mode, currency mode, etc..
- Page 11 12. «SETUP» button enters options (adjustments) menu: Press «▲», «▼» buttons to select. Press «ОК» button to adjust. 1 Present Time and date adjustments for results printing. For selector shifting use «▲», «▼», buttons «▲»,«▼», use «►»,«◄» buttons to adjust. 2 Contrast.
-
Page 12: Counter Work Preparation
Counter work preparation -Plug in power source cable; -Remove protection strip. -Turn the switch «ON»; -The counter begins to check itself: Approximately in 10 seconds it starts functioning. -
Page 13: Currency Adjustments
Error codes while self-checking: COVER ..NG – Back cover is opened. Close back cover. HOPPER..NG – (upper) input tray detector is blocked by banknotes or dusted. Remove the banknotes from the tray and clean the counter. . INSERT ..NG – Count sensors is blocked or requires cleaning. Remove the banknotes from tract or clean the machine. -
Page 14: Counting And Sorting Mode Adjustments
Counting and sorting mode adjustments Selects counting modes: FIT, D.D, CNT 8.1 «CNT» - Banknote counting in regular mode. This mode provides banknote counting without detections Mode operations are described in point .9 8.2 «MIX» - Counting mode with the function of summing mixed denominations. Description in point.10 You should settle denomination in a «MIX»... -
Page 15: Banknote Counting In A Regular «Cnt» Mode
8.4 «AUTO» Sorting mode of the first denomination. In this mode counter sorts ban- knotes on the first banknote denomination (the one that was counted first): Denomination selection menu: Denomination adjusted AUTO 8.5 «AUTO» Sorting mode of the first orientation. In this mode counter sorts ban- knotes on the first banknote orientation (the one that was counted first): Orientation selection menu: Orientation adjusted AUTO... - Page 16 9.1 Recounting operation WARNING! To avoid mistakes when counting, please mix the banknotes and resort the following: - banknotes, repaired by stickers, or washed banknotes.; -Dirty; rumpled; torn; banknotes with bending, alien writings, the one with clips. ATTENTION! Adjust regulated banknote rails, accordingly to their size. Banknotes must be put in a batch to the hopper.
- Page 17 - repeat the operation described in point 9.1 - when the operation is completed, the counter will write «prepacking-ок (batch-ok)» - prepacking completed successfully. - remove counted banknotes from the input pocket - after the pocket will be empty, add some banknotes if necessary, then you can continue counting.
-
Page 18: D.d. Mix». Recounting Mode With Summing Of Mixed Denominations
1 Currency type does not accord to the counted type.(Different. denomination) 2 Banknotes that do not accord the counting mode. (Different. Orientation) 3 Wrong banknote location in the insert pocket (New. Banknote face) 4 Banknote has rumples, alien tissue, dirt, defects, etc. To view the number of mis- takes and quantity of banknotes in the reject pocket, press «REJECT»... -
Page 19: Fit Mix». Recounting Mode With Sorting By Fitness
Turn AMT BATCH FUNC on (left picture). For selector shifting use «▲», «▼», but- tons, for ON / OFF adjustment use «►», «◄» buttons. Adjust necessary banknote summation quantity using (0-9) buttons. Press ОК button to save. Press «CLEAR» button to cancel. Load the counter with banknotes of necessary denomination, placing bigger denominations first. -
Page 20: Adjustment Of The Slot Size And Its Correct Setting
Adjustment of the slot size and its correct setting Necessary to remember! According to the thickness of counted banknotes, you need to maintain the sensitivity level of density detection between upper and lower insert rollers. Regulations are adjusted by a screw, placed on the upper panel of a counter (picture 1-5) It is convenient to adjust the clearance using a coin. - Page 21 1. Turn off the power. 2. Prepare two 20 EURO banknotes (in medium usage condition or nearly new). 3. To properly set up the kicker rollers (Figure B, position 2) and feed rollers as shown in Figure B (smooth side facing you, with ribbed lining out of sight), turn the kicker rollers (Figure B, position 2) so that they will set to the position as shown in figure B 4.
-
Page 22: Daily Servicing
Daily servicing Banknote counter is a very complicated device, which uses many detection and scan line for counterfeit detection of banknotes and banknote counting. CIS scan- ner and electronic detectors are very sensitive on dirt and dust, if they are not cleaned necessary they can give false information, which will lead to errors and bad work of device. -
Page 23: Error Counting Codes
Error counting codes Code Reason and elimination OPEN-COVER Back lid is opened. Close back lid. Hopper sensor is blocked by banknotes, or doesn’t work. Remove the FEED-ERROR banknotes from the hopper. JAM-INSERT JAM-PATH JAM-SEPARATE Banknotes are jammed in tract. Open back lid and remove banknotes from the tract. - Page 24 Code Reason and elimination CHAIN- Banknote chain detected by scanner-analog. Replace the banknote from ANALOG reject pocket into the hopper once again. Banknote chain detected by scanner Replace the banknote from reject CHAIN-IR pocket into the hopper once again. Decrease the clearance(check point 12). Ultrasound detector-detected wrong optical density of banknote.
- Page 25 There is a hole (one or more) on the banknote* STAIN There is a stain (one or more) on the banknote* TAPE There is a tape on the banknote* UNFIT Banknote is unfit*. * «FIT MIX» mode (Recounting mode with sorting by fitness). Only for PRO Nekson 2F.
-
Page 26: Warranty And Servicing
Warranty and servicing Manufacturer guarantees proper functioning of the device during the warranty peri- od since the date of sale under condition of compliance with maintenance and stor- age procedures described in this manual. After unpacking the device please keep the package and technical description. - Page 27 Warranty service is not available in the following cases: • Absence of a warranty card, an incorrectly filed warranty card, or other invalid card • If operation or maintenance rules mentioned in the manual were violated • If there is mechanical damage to the equipment •...