ABB REF601 Applications Manual page 19

1MDU07212-YN Rev. C
REF601 / REJ601
Application Manual
Sr.
Event type Description
No.
On thermal alarm output signal for both rising
4 Protection Start
& falling signal
5 Protection trip In the event of Tripping, which protection
stage (I>, I>>, I>>>, Io> and Io>>) caused
trip will be captured as an event information.
Event shall be available for both rising &
dropping
On I2> trip both rising & falling signal
On I2/I1> trip both rising & falling signal
On thermal trip output signal for both rising &
falling signal
"IRF" – internal relay fault shall be captured
6 IRF
as an event.
7 Breaker open When breaker open cmd
8 Breaker close When breaker close cmd
9 Remote trip When remotely trip command issued
10 Reset When reset of protection trip, LEDs and
screen done
11 Blocking When blocking by binary input, And shall
have event for both rising & dropping
12 Breaker When breaker open, close or maintenance
position position sensed by associated binary input
13 Memory read In case unable to read Event from EEPROM,
fail a message i.e. "Memory Read Fail" will be
displayed for that particular event
14 Hardware test When in test menu, initiate hardware test
15 Binary output When in test menu , initiate binary output test
test
16 Functional test When in test menu, initiate protection
function test
Section 2
REF601/REJ601 overview
Data considered
3Ith> Alarm ↑
3Ith> Alarm ↓
Trip I> ↑
Trip I>> ↑
Trip I>>> ↑
Trip I0> ↑
Trip I0>> ↑
Trip I> ↓
Trip I>> ↓
Trip I>>> ↓
Trip I0> ↓
Trip I0>> ↓
Trip I2> ↑
Trip I2> ↓
Trip I2/I1> ↑
Trip I2/I1> ↓
3Ith> Trip ↑
3Ith> Trip ↓
IRF codes
Breaker Open
Breaker Close
Remote Trip
Reset
BI Blocking ↑
BI Blocking ↓
CB POS CLS ↑
CB POS CLS ↓
CB POS OPN ↑
CB POS OPN ↓
CB Maint ↑
CB Maint ↓
Memory Read Fail
Hardware Test
BO Test
Functional Test
13