Toshiba e-STUDIO5540C Software Installation Manual page 48

3 INSTALLING PRINTER DRIVERS FOR WINDOWS
If your TOSHIBA MFP is not found
If your TOSHIBA MFP is not found, you must first install the printer driver by temporarily selecting a local port
and then configuring the Raw TCP/LPR port.
If this equipment is not discovered over the network after the installation is started, a dialog box indicating
this appears. Click [Continue] to continue the configuration.
7
Select [Use the following port] and then select "LPT1: ". Then click [OK].
 If a dialog box prompting you to confirm the setting of a printer for normal use appears, click [Yes]
or [No].
 If the [Windows Security] dialog box appears, click [Install this driver software anyway].
46 Installing the Printer Drivers