Setting Up The Novell Iprint - Toshiba e-STUDIO5540C Software Installation Manual

1.OVERVIEW
 Setting up the Novell iPrint
This equipment also supports the Novell iPrint. Using the Novell iPrint, you can set up the printer that can be
accessed using URL from client computers. The Novell iPrint is based on the NDPS architecture so that you
must have NDPS installed and configured in the NetWare print server.
Before setting up the Novell iPrint, confirm the following:
 The NDPS Broker, NDPS Manager, and NDPS Printer must be created.
 P.22 "Setting up NDPS"
 The Novell iManager must be installed.
For more information about installing the Novell iManager, see the documentation for the Novell iManager
that is provided by Novell, Inc.
In order to set up the iPrint system, the network administrator must do the following:
1. Installing Novell iPrint
 P.25 "Installing Novell iPrint"
2. Enabling the DNS on the Printer Services Manager
 P.25 "Enabling DNS"
3. Enabling iPrint service
 P.26 "Enabling Novell iPrint"
 Installing Novell iPrint
1
Install iPrint Client from "http://[IP address of NetWare server]/ipp".
 Enabling DNS
Before enabling DNS for the Printer Services Manager, you should add the DNS name for the Printer Services
Manager to the DNS server.
After you add the DNS to the DNS server, follow the steps below to enable the DNS on the Printer Services
Manager.
1
At the server console, enter the following syntax.
NDPSM <NDPS Manager Name> /dnsname=<NDPS Manager DNS Name>
1 OVERVIEW
Setting Up NetWare Print Server 25