Installing Wia Driver To Windows Computer - Toshiba e-STUDIO5540C Software Installation Manual

6 INSTALLING SCAN DRIVER AND UTILITIES
 Installing WIA driver to Windows computer
This section describes how to install WIA driver to Windows Vista / Windows 7 / Windows 8 / Windows Server
2008 / Windows Server 2012.
Perform installation corresponding to your Windows computer.
 To begin the installation of the WIA driver, you must first install the scan utilities to your computer.
For instructions on how to install them to your computer, see the following page:
 P.203 "Installing the scan driver and utilities using the installer"
 When you are using Windows Server 2003, Windows Server 2008 or Windows Server 2012, the
following must be done before you install WIA driver to your computer.
- For Windows Server 2003
Select [Windows Image Acquisition (WIA)] from [Services] of [Administrative Tools], and change the
Startup Type from [Disabled] to [Automatic].
- For Windows Server 2008
Install [Desktop Experience] from [Server Manager] of [Administrative Tools].
Select [Windows Image Acquisition (WIA)] from [Services] of [Administrative Tools], and change the
Startup Type from [Disabled] to [Automatic].
Select [PnP-X IP Bus Enumerator] from [Services] of [Administrative Tools], and change the Startup
Type from [Disabled] to [Automatic].
- For Windows Server 2012
Install [Desktop Experience] from [Server Manager] of [Administrative Tools].
 To perform installation, you must log onto Windows with the "Administrator" account; this enables the
installation and uninstallation of client software. However, if you have logged on with a user account
other than "Administrator", entering an administrator password upon display of the [User Account
Control] dialog box enables you to perform the installation by temporarily changing the user account.
1
Open the [Network] screen.
 When you are using Windows 7
Click the start button, select [Computer] and click [Network].
 When you are using Windows Vista / Windows Server 2008
Click the start button and click [Network].
 When you are using Windows 8 / Windows Server 2012, see the following section.
 P.115 "Accessing the [Network] screen on Windows 8 / Windows Server 2012"
206 Installing Scan Driver and Utilities