HXAM_ST_Faceplate
•
166
Low:
–
HD Hot: Gives the value of HD Hot for the current OPS.
HD Cold Monitor:
–
Status: Gives the status of the HD Cold Monitor. The status values are:
Enabled:
Not Enabled:
Stale Data in Trained Set: If one or more BOPS is stale.
Not Available:
–
Limit Reached: Gives the subcondition for the
HD_Cold_Operating_Point condition. The different subconditions that
will be reported during Monitoring are:
Normal:
High:
Low:
–
HD Cold: Gives the value of HD Cold for the current OPS.
Section 9 Heat Exchanger Asset Monitor (HXAM)
HD Hot has crossed the
HD_Hot_Low Limit.
If HD Cold Monitor is enabled.
If HD Cold Monitor is not enabled.
During Training.
HD Cold is within the Normal range.
HD Cold has crossed the
HD_Cold _High Limit.
HD Cold has crossed the
HD_Cold_Low Limit.
3BUA000150-600