ehang GHOSTDRONE 2.0 Operating Manual page 18

Note：Press the power button once after plugging in the cable to charge the VR goggles. Please
finish three times full charge and discharge when you use the goggles first time. That can make
the battery show more accurate.
Note:
1. Press VIEW SWITCH button to switch from video transmission mode to goggle front camera. Users
can watch the front view through the goggle front camera. To switch back to video transmission
mode, press this button again.
2. After automatically searching the channel successfully, the channel will be recorded and no need
to search again next time.
3. It is normal to observe some white noise on the screen.
Charging
You can charge the VR goggles by connecting it to a PC with a USB cable. It takes about 3 hours to
fully charge the goggles. When charging through a USB adapter, the required input current is 500 mA
or higher.
Note：Press the power button once after plugging in the cable to charge the VR goggles. Please
finish three times full charging and discharging when you use the goggles first time. That can make
the battery show more accurate.
Indicator Lights Instructions
Legend
High Frequency
Power
Indicator
Data
Signal Indicator
Vision
Signal Indicator
Menu Settings
The parameters in the menu have been correctly set to general settings before delivery. Adjust only
when necessary.
When turning the goggles on, press the MENU button to enter the menu. Press "+" or "-"button to
move up or down to choose the parameter for adjustment. Press the MENU Button again to select
the parameter. Adjust the parameter with the "+" or "-" button. Press MENU Button again to exit.
Low Frequency Flash
Power On
Battery life≤30%
Charging
Power Off/ Fully Charged
Searching for Bluetooth
Bluetooth/ Wi-Fi Connects Successfully
Power Off
Image Transmission Mode On
Searches Channel Successfully.
Power off/ Switch to Front Camera
17
Solid Off