Optipoint Signature Module - Siemens optiPoint key module Installation Instructions Manual

optiPoint signature module

optiPoint signature module
Safety notes
The optiPoint telephones and add-on devices comply with the stipulated confor-
mity and safety regulations (CE).
•
•
•
Applications
The optiPoint signature module can be connected to the following telephones:
optiPoint 600 office, optiPoint 500 advance/standard/basic,
optiPoint 420 advance/standard, optiPoint 410 advance/standard,
optiPoint 400 standard.
The optiPoint signature module is a chipcard reader which simplifies the use of
PIN-protected functions.
Package Contents
•
•
Installation
For installation, see fold-out page 3 (Pos.
1. Disconnect the subscriber line from the optiPoint telephone.
2. Place the telephone
3. Mount the optiPoint signature module
4. Connect the optiPoint signature module and the optiPoint telephone or the
5. Reconnect the subscriber line to the optiPoint telephone.
The optiPoint telephone and the optiPoint signature module are ready for opera-
tion.
34
The optiPoint signature module can only be operated on the HiPath 4000
communication platform.
Avoid exposing the equipment to direct sunlight or other sources of heat.
Protect the equipment from moisture and liquids.
Never insert objects other than the chip card into openings in the equipment.
1 optiPoint signature module
1 connecting cable
the telephone or on the installed optiPoint key module.
key module with the supplied connecting cable
to
on a soft surface with the keypad facing down.
by snapping it into the slots
).
.
on