Digital Equipment DECwriter 500i Service Manual page 54

Parameter
PerSkip
TextScale
AlwaysBidir
InkSaveMode
Bimdensity
Terminator
Quality
Parameter Description
WidthType
Installation 3-18
Description Note
Off Paper skip disabled (TOF= 0, BOF= printing
continues to the last line of the page)
On Paper skip enabled (TOF= 12.7 mm - 0.5";
BOF= 12.7 mm - 0.5")
Off Nominal line feed value
On Reduced line feed value to increase the number of
lines per printed page
Off Bi-directional print, if possible
On Always bi-directional print
Off Feature disabled
On Reduces the ink consumption
75 75 dpi (dots per inch)
100 100 dpi
150 150 dpi
300 300 dpi
Normal CR = CR, LF = LF, FF = FF
AutoLF CR = CR+LF LF = LF, FF = FF
AutoCR CR = CR, LF = LF+CR, FF = FF+CR
AutoCRLF CR = CR+LF, LF = LF+CR, FF = FF+CR
LQ Letter Quality
NLQ Near Letter Quality
Draft Draft
Note
Normal Normal size
HalfWidth Compressed characters
HalfHeight Half height
HalfWidthHei Compressed -half height
ght