SEAT BELT SYSTEM
2. Pretensioner Connector
A: OPERATION
1) How to disconnect:
(1) Using a flat tip screwdriver, pull the push
lock upward to unlock.
(2) Pull the connector to disconnect from retrac-
tor assembly.
2) How to connect:
Connect the connector in reverse order of discon-
necting. At this time, be sure to insert the push lock
in until connecting sound is heard.
CAUTION:
• Be sure to insert the connector in until it
locks. Then pull on it gently to make sure that it
is locked.
• At this time, be sure to insert the push lock in.
Pretensioner Connector
AB-00478
AB-00479
AB-00480
SB-6