Subaru IMPREZA 2004 Service Manual page 17

5. SHOULDER SEAT BELT CTR ASSEM-
BLY (WAGON MODEL)
Install in the reverse order of removal.
CAUTION:
• During installation, make sure that the seat
belts are not twisted.
• After installation, make sure that the seat
belts are smoothly extended and wound.
6. CENTER SEAT BELT ASSEMBLY (WAG-
ON MODEL)
Install in the reverse order of removal.
CAUTION:
During installation, make sure that the seat
belts are not twisted.
C: INSPECTION
1. OUTER SEAT BELT RH ASSEMBLY AND
LH ASSEMBLY (SEDAN MODEL)
Check for the following, and replace with new parts
if necessary.
• Seat belt is slackened, bent, or frayed. Seat belt
is abnormally wound or extended.
2. SHOULDER SEAT BELT CTR ASSEM-
BLY (SEDAN MODEL)
Check for the following, and replace with new parts
if necessary.
• Seat belt is slackened, bent, or frayed. Seat belt
is abnormally wound or extended.
3. CENTER SEAT BELT ASSEMBLY (SE-
DAN MODEL)
Check for the following, and replace with new parts
if necessary.
• Inner seat belt is deformed or damaged.
• Seat belt buckle is engaged improperly.
4. OUTER SEAT BELT RH ASSEMBLY AND
LH ASSEMBLY (WAGON MODEL)
Check for the following, and replace with new parts
if necessary.
• Seat belt is slackened, bent, or frayed. Seat belt
is abnormally wound or extended.
5. SHOULDER SEAT BELT CTR ASSEM-
BLY (WAGON MODEL)
Check for the following, and replace with new parts
if necessary.
• Seat belt is slackened, bent, or frayed. Seat belt
is abnormally wound or extended.
Rear Seat Belt
6. CENTER SEAT BELT ASSEMBLY (WAG-
ON MODEL)
Check for the following, and replace with new parts
if necessary.
• Inner seat belt is deformed or damaged.
• Seat belt buckle is engaged improperly.
SB-15
SEAT BELT SYSTEM