SEAT BELT SYSTEM
6) Remove the bolts, and then detach the outer belt
side.
5. SHOULDER BELT CTR ASSEMBLY
(WAGON MODEL)
1) Remove the shoulder anchor bolt, and then de-
tach the shoulder anchor from quarter pillar.
2) Remove the quarter trim. <Ref. to EI-48, RE-
MOVAL, Rear Quarter Trim.>
3) Remove the three bolts, and then detach the
outer belt center assembly.
Rear Seat Belt
6. CENTER SEAT BELT ASSEMBLY (WAG-
ON MODEL)
1) Remove the rear seat cushion.
2) Remove the bolt, and then detach the center
seat belt assembly.
SB-00125
B: INSTALLATION
1. OUTER SEAT BELT RH ASSEMBLY AND
LH ASSEMBLY (SEDAN MODEL)
Install in the reverse order of removal.
CAUTION:
• During installation, make sure that the seat
belts are not twisted.
• After installation, make sure that the seat
belts can be smoothly extended and wound.
SB-00126
2. SHOULDER SEAT BELT CTR ASSEM-
BLY (SEDAN MODEL)
Install in the reverse order of removal.
CAUTION:
• During installation, make sure that the seat
belts are not twisted.
• After installation, make sure that the seat
belts can be smoothly extended and wound.
3. CENTER SEAT BELT ASSEMBLY (SE-
DAN MODEL)
Install in the reverse order of removal.
CAUTION:
During installation, make sure that the seat
belts are not twisted.
SB-00127
4. OUTER SEAT BELT RH ASSEMBLY AND
LH ASSEMBLY (WAGON MODEL)
Install in the reverse order of removal.
CAUTION:
• During installation, make sure that the seat
belts are not twisted.
• After installation, make sure that the seat
belts can be smoothly extended and wound.
SB-14
SB-00128