Page 1
It will be necessary to register your ProJet 3-D Production System to access the ProJet 5000 Online User Guide. To register, type in “ projet.3dsystems.com” in the web browser. Once registered, an email confirmation will be sent to you with a link to 3D Systems' 3dpedia. pj5k-01 pj5k-01 (http://3dpedia.3dsystems.com).
Page 2
WHEN OPERATING THE PRINTER, ADHERE TO ALL PERSONAL AND SAFE HANDLING OF MATERIALS DESCRIBED IN THE SAFETY SECTIONS OF THE USER GUIDE. POWER SUPPLY PLATFORM INSTALLATION The AC voltage and current requirements for the ProJet™ Production Modeling System are: NOTE: Clean platform elevator (A) and platform (B) using Isopropyl Alcohol. When cleaning platform, clean the front and back sides.
Page 3
To remove bottle, open delivery module; press and hold release latch (C) down. Grip bottle handle and lift bottle out of module. NOTE: See ProJet™ 5000 User Guide for proper material bottle storage instructions. P.N.: 316131-04, 02/12 3D Systems Confidential...
Page 4
ProJet™ 5000 Quick Reference Guide 3-D Printer Waste Bag Installation & Removal Wear protective gloves before removing any waste material. Be careful not to spill, drop, or expose others to these materials. Dispose the material according to your local regulatory guidelines.
Page 5
(B5) When the platform is empty, press YES (B4) . The modeler will start the demo build job. NOTE: Refer to ProJet 5000 User Guide, under the operation section for the build process, how to PLATFORM EMPTY/ DOOR CLOSED? remove parts from the modeler and cleaning parts procedure.
Need help?
Do you have a question about the PJ 5000 and is the answer not in the manual?
Questions and answers