1140 System Board - IBM thinkpad x30 Hardware Maintenance Manual

Removing and replacing a FRU

1140 System board

For access, remove following FRUs, in order:
v "1010 Battery pack" on page 60
v "1020 Hard-disk drive" on page 61
v "1030 DIMM" on page 63
v "1040 Backup battery" on page 64
v "1050 Keyboard" on page 65
v "1060 Mini PCI adapter" on page 69
v "1070 Fan assembly" on page 72
v "1080 Communication daughter card (CDC)" on page 74
v "1090 Keyboard bezel" on page 79
v "1100 PC card slot" on page 82
v "1110 Hinge cover and LCD assembly" on page 85
v "1120 Sub card assembly" on page 89
v "1130 Speaker assembly" on page 90
Before removing the system board, remove the hard-disk
drive holder (steps 1 and 2 ) and the cable guide (steps
3 to 5 ).
Step Screw (quantity)
1
M2 × 9.5 mm, nylon-coated (2)
(continued)
92
ThinkPad X30 (MT 2672/2673)
1
2
Torque
0.245 Nm
(2.5 kgfcm)