About Wheelwitness Cm Pro Dashboard Camera; Setting Up For First Time Use - Wheel Witness CMPRO Owner's Manual

About WheelWitness CM PRO Dashboard Camera
The camera is designed to automatically turn ON when it receives power to the DC IN port. It also
automatically shuts down and records for a few extra seconds using the internal battery when the
power is shut off (to avoid any sudden power cuts and possibly corrupting data). Under default settings
the camera always cycles or "loops" the SD card so you will always be recording and never run out of
space.
Setting Up for First Time Use
1. Install microSD Card into the card slot. (If you have trouble use a penny to push it in.)
2. Using the clips on the back of the CM PRO, attach it securely to your rear view mirror as
shown below.
Certain camera functions such as Motion Sensor and G-sensor should remain
OFF under normal operating conditions. They are intended to be used ONLY
when the vehicle is stationary and would interfere with normal camera
operation while driving. Please only change the settings as required!
If you have any questions, please contact us!
P a g e | 2