Adjustment
15
Aligning thread catcher laterally
.07.02
O Remove the knife 1 ( screw 2 ).
O Move the needle bar to b.d.c.
O Loosen the stop 3 ( screws 4 ).
O Manually position the thread catcher 5 in front of the needle.
O Align the thread catcher 5 ( screws 6 ) according to the rules.
28
Rule
1. The tip of the thread catcher 5 should point exactly at the needle midpoint.
2. The thread catcher 5 should be horizontal and not touch at any position as it moves.
Fig. 15 - 21
The knife 1 remains dismantled and the stop 3 remains loosened for other set-
tings.
5
2
6
6
3
1
5