Auxiliary Power - Bosch NBN-80052 Installation Manual

DINION IP starlight 8000
MP
6.2

Auxiliary power

Caution!
The Low Voltage power supply unit must comply with EN/UL
!
60950. The power supply must be a SELV-LPS unit or a SELV -
Class 2 unit (Safety Extra Low Voltage - Limited Power Source).
Caution!
Use only a +12 VDC power supply as an auxiliary power source.
!
The auxiliary power supply unit must be isolated from earth.
Connect an approved power supply unit with a rated supply
voltage of 12 VDC as follows:
1.
2.
3.
Bosch Security Systems
4 5 6 | 4 5 6
D A
A L
T A
A R
M
1 2 3 | 1 2 3
- +
12VDC
CVBS
Strip back 5 mm (0.2 in) of insulation on the power supply
cable (must be 16-22 AWG stranded wire or 16-26 AWG
solid wire).
Loosen the screws of the supplied 2-pole connector and
insert the stripped wires, then tighten the screws again.
Insert the 2-pole connector into the camera power socket.
E
T
H
-
P
o
E
MENU
Connection | en
5 mm
(0.2 in)
2015.04 | v2.0 | AM18-Q0665
21