Service Setting - apivio IP336PoE User Manual

NETWORK SETTING
3. How to use PPPoE
- Press shortcut keys as shown below, and move to
PPPoE setting
ID
skbroadband
Password
skbb1234
MSS
1452
* If you forget your ID or password please contact service provider.
12
Enter ID and press confirm button.
Press menu button to swift input
mode to number or English
upper/lower case.
Enter password and press confirm
button. Press menu button to swift
keyboard mode from number to
English upper/lower case.
Default value is 1452.
Please do not change the value
and press confirm button.

SERVICE SETTING

Service (VoIP) detail settings
1. LCD screen settings
Message
Status Info
Function settings
Phone settings
Wizard
Network settings
Service
NAT
Wizard
Static IP
Dynamic IP
PPPoE
Phone numbers
Press menu button and after
message is appeared on the
LCD screen as shown on the right,
press [4] button or move to menu
no.4 and press confirm.
Press [1] button or move to
menu no.1 and press confirm.
Set the network settings according
to the network environment.
(For IP setting, please refer
"Network Settings".)
After setting IP, enter user's
phone numbers to use numeric
keys and press confirm button.