Changing The Service Level Password - Data Aire dap 4 Installation, Operation & Maintenance Manual

Note: Factory Level Menus are for configuring the unit. The dap4 controller is used for a variety
of equipment types. The controller is based on the unit type, unit components and options. Under
normal circumstances these menus should not be changed. If they need to be changed, please
consult with Data Aire engineering or service personnel before proceeding.

Changing the Service Level Password

The Service Level password can be changed by doing the following:
Enter the Main Menu by pressing the Menu key. You will be prompted to Insert the Service Level
password. Enter the current password as previously explained.
▼ Press the Menu key. The screen will display the following message:
▼ Press the Enter key. The cursor will highlight the first input. Change the input by pressing the
UP or Down key. Once the selected number is displayed, press the Enter key to move to the next
input. Repeat the same steps for each input.
After the last input has been entered, press the MENU key to return to Main Menu. The password
is stored.
12 • dap4 User Manual
Service Security
Change service level
password (PWI): 0000