3D Settings; 3D Mode; 2D Only; Virtual 3D - Hi-level 48UHL950 Operating Instructions Manual

Select Left/Right Swap option using the Up
or Down buttons. Press Left or Right buttons
to set as Left/Right or Right/Left.

3D Settings

3D Mode

You can customize the 3D mode settings to
provide the best viewing experience. Select
one of the following modes to experience 3D
image viewing:
Auto: Automatically switches to 3D mode
if 3D information is detected from a digital
broadcast or a HDMI source.
Side by Side: Displays 3D content which is
originally in a form of side by side.
Top bottom: Displays 3D content which is
originally in a form of top and bottom.
Off: 3D function is turned off.

2D Only

If content is 3D but you want to watch it in 2D,
you can switch to 2D Only mode. There are 2
options (LEFT and RIGHT) to select which
side of the content you want to watch in 2D.

Virtual 3D

Conversion from 2D to 3D. You can enable
or disable this feature by setting as On or
Off. Or depending on model, you can set
the level of depth of field to various settings
or turn it off.

Left/Right Swap

You can use this setting to shift the phase of
the 3D left/right broadcast.
3D Depth Sense (depending on model)
This setting enables the control of 3D depth.

3D Viewing Information

Refer to the size/distance guidelines below
to experience 3D in the best possible way.

Viewing Distance

Size
23 26 32 37 39 40 42 46 47 48 50 55 65
(inch)
Viewing
distance
(m)

Horizontal Viewing Angle

Vertical Viewing Angle

It is strongly recommended that the eye level
of the viewer should be same height as the
center of the TV. In case that is not possible,
tilt the TV accordingly in its stand or wall
mount. The picture may not be visible or
may look dark if you do not stay within the
viewing angle.
English - 90 -