System Audio Control - Hi-level 48UHL950 Operating Instructions Manual

RC Passthrough and set as Off by pressing
Left or Right button. This feature can also be
enabled or disabled under the System>Op-
tions>More menu.
The TV supports also ARC(Audio Return
Channel) feature. This feature is an audio
link meant to replace other cables between
the TV and the audio system (A/V receiver
or speaker system).
When ARC is active, TV does not mute its
other audio outputs automatically. So you
need to decrease TV volume to zero manu-
ally, if you want to hear audio from connected
audio device only (same as other optical or
co-axial digital audio outputs). If you want to
change connected device's volume level, you
should select that device from the source list.
In that case volume control keys are directed
to connected audio device.
Note: ARC is supported only via the HDMI3
input.

System Audio Control

Allows an Audio Amplifier/ Receiver to
be used with the TV. The volume can be
controlled using the remote control of the
TV. To activate this feature set the Speakers
option in the System>Options>More menu
as Amplifier. The TV speakers will be muted
and the sound of the watched source will be
provided from the connected sound system.
Note: The audio device should support Sys-
tem Audio Control feature and CEC option
should be set as Enabled.
E-Manual
You can find instructions for your TV's featu-
res in the E-Manual.
To use E-Manual, press to the Info button
while main menu is displayed on the screen
or press Quick Menu button, select Infor-
mation Booklet and press OK.
By using the directional buttons select a
desired category. Every category includes
different topics. Select a topic and press OK
to read instructions.
To close the E-Manual screen press the Exit
or Menu button.
Note: The contents of the E-Manual may
vary according to the model.
English - 73 -