Media Browser Menu; Loop/Shuffle Mode Operation - Hi-level 48UHL950 Operating Instructions Manual

formatting process.
Wait a little while before each plugging and
unplugging as the player may still be reading
files. Failure to do so may cause physical
damage to the USB player and the USB
device itself. Do not pull out your drive while
playing a file.
You can use USB hubs with your TV's USB
inputs. External power supplied USB hubs are
recommended in such a case.
It is recommended to use the TV's USB
input(s) directly, if you are going to connect
a USB hard disk.
Note: When viewing image files the Media
Browser menu can only display 1000 image
files stored on the connected USB device.

Media Browser Menu

You can play photo, music and movie files
stored on a USB disk by connecting it to your
TV. Connect a USB disk to one of the USB
inputs located on the side of the TV. Pressing
the Menu button while in the Media Browser
mode will access the Picture, Sound and
Settings menu options. Pressing the Menu
button again will exit from this screen. You
can set your Media Browser preferences by
using the Settings menu.
Loop/Shuffle Mode
Operation
Start playback with
the Play button and
activate
Start playback with
the OK button and
activate
All files in the list
will be continuously
played in original
order
The same file will be
played continuously
(repeat)
English - 72 -
Start playback with
the Play button and
activate
Start playback with
the Play button and
activate ,
FollowMe TV
With your mobile device you can stream
the current broadcast from your smart TV
using the FollowMe TV feature. Install the
appropriate Smart Center application to your
mobile device. Start the application.
For further information on using this feature
refer to the instructions of the application
you use.
Note: This application may not be compatible
with all mobile devices. Both of the devices
must be connected to the same network.
CEC and CEC RC Passthrough
This function allows to control the CEC-e-
nabled devices, that are connected through
HDMI ports by using the remote control of
the TV.
The CEC option in the System>Options>-
More menu should be set as Enabled at
first. Press the Source button and select the
HDMI input of the connected CEC device
from the Sources List menu. When new CEC
source device is connected, it will be listed in
source menu with its own name instead of the
connected HDMI ports name(such as DVD
Player, Recorder 1 etc.).
The TV remote is automatically able to per-
form the main functions after the connected
HDMI source has been selected.
To terminate this operation and control the
TV via the remote again, press Quick Menu
button on the remote, highlight the CEC
All files in the list will
be played once in
random order
All files in the list
will be continuously
played in the same
random order.