Table of Contents
Advertisement
INSTALLATION
This unit is a portable air conditioner, which can be
moved from room to room.
When you use this
appliance for cooling or dehumidifying function, air
from the exhaust port at the back of unit must be
exhausted out of the room to complete the air
exchange of the condenser. When the appliance
is operating on fan only, no outdoor air exchange
takes place; hence you do not need to connect the
exhaust hose.
U
se in the upright position on a flat level surface, at
least 50cm from any objects. DO NOT plug it in until
exhaust hose is installed.
Installing the exhaust hose
Use only the hose provided and clip exhaust hose and indoor adaptor to the back of
the air conditioner.
Using the fishtail adaptor
• Open window to an appropriate angle to fit adaptor outside.
Avoid kinks and bends in the exhaust hose as this will cause expelled moist air to
build up causing the unit to overheat and shut down.
The hose can be extended to 1800mm, but for maximum efficiency use the shortest
length possible.
WARNING!
Do not replace or extend the hose as this could cause the unit to malfunction.
Hide quick links:
Advertisement
Table of Contents
