Audiovox Rampage AV-455 Owners And Installation Manual page 6

OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS
ON-OFF POWER BUTTON ON-OFF POWER BUTTON ON-OFF POWER BUTTON ON-OFF POWER BUTTON ON-OFF POWER BUTTON
Press this button to turn the unit on ("P ON" will
briefly appear on the display panel) or off.
VOLUME/LEVEL CONTROL VOLUME/LEVEL CONTROL VOLUME/LEVEL CONTROL
VOLUME/LEVEL CONTROL VOLUME/LEVEL CONTROL
To increase the volume level, turn the knob clockwise.
The volume will increase and the level will be shown
on the display panel from a minimum of "VOL
a maximum of "VOL
level, turn the knob counter-clockwise. The display
will automatically return to the normal indication 5
seconds after the last volume adjustment or when
another function is activated. This control is also
used in conjunction with the Select button
adjust the bass, treble, balance and fader levels as
described in ,
SELECT BUTTON SELECT BUTTON
SELECT BUTTON SELECT BUTTON SELECT BUTTON
This button is used to select the audio function
(bass, treble, balance, or fade) to be adjusted using
the Level control
once will set the unit for volume adjustment ("VOL"
will appear on the display panel). Pressing the
button additional times will select bass adjustment
("BAS" on the display), treble ("TRE"), balance
("BA"), or fader ("FA"). The display will automatically
5 5 5 5 5
return to the normal indication 5 seconds after the
last adjustment or when another function is activated.
00
". To decrease the volume
63
, and .
. Pressing the Select button
BASS CONTROL BASS CONTROL
BASS CONTROL BASS CONTROL BASS CONTROL
To adjust the bass level, first select the Bass mode
by pressing the Select button
indication appears on the display panel. Within 5
seconds of choosing the Bass mode, turn the Level
c o n t r o l counter-clockwise to decrease the bass
" t o response or clockwise to increase it as desired. The
level will be shown on the display panel from a
minimum "BAS " to a maximum of "BAS
-06
("BAS " indicates flat response). The display will
00
automatically return to the normal indication 5
seconds after the last adjustment or when another
t o function is activated.
TREBLE CONTROL TREBLE CONTROL TREBLE CONTROL TREBLE CONTROL TREBLE CONTROL
To adjust the treble level, first select the Treble mode
by pressing the Select button
indication appears on the display panel. Within 5
seconds of choosing the Treble mode, turn the Level
c o n t r o l counter-clockwise to decrease the treble
response or clockwise to increase it as desired. The
level will be shown on the display panel from a
minimum "TRE " to a maximum of "TRE
-06
("TRE " indicates flat response). The display will
00
automatically return to the normal indication 5
seconds after the last adjustment or when another
function is activated.
so the "BAS"
"
+06
so the "TRE"
"
+06
128-5504 128-5504 128-5504
128-5504 128-5504
6 of 12 6 of 12 6 of 12 6 of 12 6 of 12